Download Print this page

Monte Carlo Fan Company 3ACR52XXD Series Owner's Manual And Installation Manual

Ac-552

Advertisement

Quick Links

Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
3ACR52XXD
RETAILER NAME:
RETAILER ADDRESS:
Series Fan
UL Model No. : AC-552
8.25 kgs
18.15 lbs
Total fan weight with light kit

Advertisement

loading

Summary of Contents for Monte Carlo Fan Company 3ACR52XXD Series

  • Page 1 Owner’s Guide and Installation Manual Series Fan 3ACR52XXD UL Model No. : AC-552 Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 8.25 kgs 18.15 lbs Total fan weight with light kit...
  • Page 2: Cautions And Warnings

    All set screws must be checked and tightened where necessary before installation. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Steplad- der and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2013 Monte Carlo Fan Company 7/1/2013...
  • Page 3 Insert cross pin through yoke and downrod until point appears on the other side. © 2013 Monte Carlo Fan Company 7/1/2013...
  • Page 4 Black from remote marked AC L. Connect all of the outlet box. The splices after being made green ground wires to Grounded wire from should be turned upward and pushed carefully up House. into the outlet box. © 2013 Monte Carlo Fan Company 7/1/2013...
  • Page 5 Install the screw removed in step off, replace bulbs with the correct black wire from light fixture. wattage bulbs, turn the power on. 24. Tighten all screws securely. Note: Do not replace bulb until it cools down. © 2013 Monte Carlo Fan Company 7/1/2013...
  • Page 6 4 pins and snapping into place. cover in place. WALL MOUNT INSTALL Attach front cover to wall control Install wall control unit to outlet box with screws provided. Snap battery using machine screws provided. cover in place. © 2013 Monte Carlo Fan Company 7/1/2013...
  • Page 7 “light dimmer”. The light will cycle from bright to dim to bright until button is released. Light will maintain last setting if turned off. FORWARD/REVERSE Depress rev button allow a few seconds for remote to change rotation direction with fan running. © 2013 Monte Carlo Fan Company 7/1/2013...
  • Page 8: Troubleshooting

    Over lamping the fan will result in the fan lights shutting down until the proper WARNING: wattage of bulbs are installed. Reset the lights by turning off, replace bulbs with the correct wattage bulbs, Turn power on. © 2013 Monte Carlo Fan Company 7/1/2013...
  • Page 9 Feb.2012 New format Jul.2013 Update for CUL regulation...