Layout Of The Configuration Program Screens - Siemens Gigaset WLAN Operating Instructions Manual

The configuration program

Layout of the configuration program screens

At the very top of the start screen is a menu bar for selecting the language.
ì
If you do not want to use the default language, click on the language you want. The
start screen will then reappear in the new language.
Below the language menu bar you will find all the configuration program functions.
Clicking on a name will take you straight from any screen in the program to the menu
item selected.
The configuration program has the following menus:
Home
Basic Setup
Security Setup
Advanced Setup
Status
Logout
Clicking on the icon under the entry or on the menu item in the page header opens the
menu in question.
The right-hand pane contains short texts to help you with the configuration.
42
You return to this start screen.
Here you can make the basic setup for your Gigaset WLAN
Repeater: You can choose the operating mode, and the
settings for the local network and the wireless network
(see from page 43).
Here you can configure the security settings for your net-
work operations, e.g. a password for accessing the config-
uration interface or encrypting data transmission in wire-
less networks (see from page 64).
Here you can change all the settings of your Gigaset
WLAN Repeater. The individual functions are described
from page 72.
Here you can find information about the status and con-
figuration of your Gigaset WLAN Repeater (see from
page 96).
This closes the configuration program and returns you to
the login screen.