Siemens Gigaset WLAN Operating Instructions Manual page 58

The next settings depend on whether you are using the device as an Access Point
(see next section) or as Internet access (see page 56).
Use as Access Point for a local network
This opens the screen for completing the basic setup.
You should now make the settings for network security
ì
Click on Finish.
ì
This takes you to the Security Setup menu, which is described from page 64.
Please remember:
When you have configured your wireless network, you can connect the Gigaset WLAN
Repeater to a router via the Ethernet interface and connect the wireless network to an
Ethernet. Make sure that you change the IP configuration of your Gigaset WLAN
Repeater to match the configuration of your existing network, for example assigning
a valid IP address and subnet mask (see page 83).
Basic setup
55