Siemens Gigaset WLAN Operating Instructions Manual page 48

After the Operating Mode page, you will see the Repeater screen.
You will now see a list of all reachable access points with SSID, MAC address, wireless
channel and type.
ì
To refresh the display, click on Refresh.
ì
Click on the check box for the Access Point whose range you wish to increase by
means of the Gigaset WLAN Repeater. To do this, you will need to know which SSID
this Access Point is using.
Please remember:
If there are several Access Points using the same SSID, you can identify the different
units by their MAC address. The MAC address of an Access Point in the Gigaset product
range is shown on the nameplate on the underside of the unit.
ì
Enter a name for the Access Point in the box under the SSID. This name will help you
to identify the various devices more easily.
ì
Click on Next.
Basic setup
45