Siemens Gigaset WLAN Operating Instructions Manual page 62

LAN settings
For Ethernet adapter (infrastructure) mode.
In the next screen you can make the settings for the local network (LAN).
ì
In the two boxes, enter the IP address and subnet mask. Make sure that the IP
address you assign complies with the conventions for private IP addresses described
on page 31.
Please remember:
Make sure that you adjust the IP configuration of your Gigaset WLAN Repeater as well
as that of the connected devices (PC, games console etc.) to the configuration of the
other participants in your networks or of your communication partner, for example a
valid IP address (that differs from the already assigned addresses) and the appropriate
subnet mask.
ì
Click on Next.
This opens the screen for completing the basic setup.
Basic setup
59