Table of Contents
Advertisement
Setting the Real Time
Menu 101
Clock and Calendar
1
Display menu 101 and press the SHIFT button.
The current calendar setting appears in the setting
mode format (yyyymmdd).
Example: October 8, 2000
Blinking
Note
The first two digits of the year setting cannot be
changed.
2
Use the SHIFT and ADVANCE buttons to set the
desired date.
If there are no more new settings to be made, go
directly to step 5.
3
Press the SHIFT button while the date display is
blinking (Example: 20001008).
The current time (real time clock) setting is
displayed.
Example: 10:15:05 PM
Blinking
4
Use the SHIFT and ADVANCE buttons to set the
current time.
5
Press the RESET/(MENU SET) button.
This starts the clock advance operation.
6
Press the MENU button.
This returns the display window to the display
shown before the VCR menu.
The date set can be displayed in the time value
indication (see page 64) in the following way.
On the DSR-300A: Displayed in mmddyyyy
format (Example: 10081998)
On the DSR-300AP: Displayed in ddmmyyyy
format (Example: 08101998)
Checking the Total
Menu 201
Operating (Power-On) Hours
1
Display menu 201 and press the SHIFT button.
Pressing the SHIFT button cycles through the
following display items.
Indication
Head drum operating hours
Tape transport hours
Total operating hours
Menu number
2
Check the indication, then press the RESET/
(MENU SET) button, followed by the MENU
button.
This returns the display window to the display
shown before the VCR menu.
Selecting Frame Mode
Menu 204
(DF/NDF) for Time Code (for
DSR-300A only)
Select frame modes when setting the time code.
Drop-frame mode (factory setting): When adjusting
the discrepancy between time code value and real
time
Non-drop-frame mode: When you need not adjust
the discrepancy between time code value and real
time
For details of time code settings, see page 66.
Chapter 5 Adjustments and Settings
Example
A 0492Hr
b 0480Hr
C 0853Hr
201 0492
99
Advertisement
Table of Contents
