Configuration Card; Colorqube 8570/8870 Color Printer - Xerox ColorQube 8570 System Administrator Manual

Configuration Card

The printer configuration card stores network settings and configuration data. The configuration card
is hot swappable, enabling you to share or replace it, providing an alternative to onsite service.
If a configuration card is removed from an old printer and inserted into a new printer, the settings are
copied to the new printer when it is turned on. The new printer assumes the identity of the old printer,
eliminating the need to reconfigure network settings.
This appendix includes:
• General Information Parameters
• PostScript Parameters
• PCL Parameters on page 91
• USB 2.0 Parameters
• Hard Drive Parameters
• Network Information Parameters
• Ethernet Network Parameters
• EtherTalk Parameters
• TCP/IP Parameters
• DNS Parameters on page 92
• SLP Parameters on page 93
• SSDP Parameters on page 93
• NBNS (WINS) Parameters
• Access Control Parameter
• LPR Parameters on page 93
• AppSocket (Port 9100) Parameters
• IPP (Internet Printing Protocol) Parameters
• SNMP Parameters
• CentreWare IS (HTTP) Parameters
• FTP Parameters on page 94
• Status Notification Parameter
• MaiLinX Remote Printing Parameters
on page 90
on page 90
on page 91
on page 91
on page 91
on page 91
on page 92
on page 92
on page 93
on page 93
on page 93
on page 94
on page 94
on page 94
on page 94
on page 93
ColorQube 8570/8870 Color Printer
System Administrator Guide
A
89