Xerox ColorQube 8570 System Administrator Manual page 100

Printer Commands
PJL Command
@PJL XJAUSERNAME="username"
@PJL XJOBPASSWORD=value
@PJL XPERSONALJOB
@PJL XPROOFJOB
@PJL XSAVEDJOB
@PJL XSECUREJOB
@PJL XIGNOREFF=value
@PJL XLINETERMINATION=value
@PJL XMBFSIZE=value
@PJL XMEDIASOURCE=value
@PJL XMEDIATYPE=value
@PJL XPCLTRAYSWITCH=value
100 ColorQube 8570/8870 Color Printer
System Administrator Guide
Values
Roman-8 characters
1–255
4-digits
n/a
n/a
n/a
n/a
ON, OFF
ON, OFF
ANY or any supported
media size, such as
LETTER, STATEMENT,
and EXECUTIVE
ANY, TRAYn
ANY or any supported
media type, such as
PAPER and LABEL
ON, OFF
Description
Sets the file name for Job Accounting.
Assigns the job password used by Secure
Print.
Starts a Personal Print job.
Starts a Proof Print job.
Starts a Saved Print job.
Starts a Secure Print job.
Ignores FormFeed commands when
printing PCL blank pages.
Terminates a line.
Sets the media size for Tray 1.
Sets the media source.
Sets the media type.
Switches trays when a tray becomes
empty. If AutoSelect is chosen as the
paper source (tray) in PCL, then tray
switching is always active, regardless of
the value. When the current tray
becomes empty, the printer attempts to
switch to another tray containing the
same size and type of paper. This
command only takes effect when a
specific tray, such as Tray 2, is selected in
the job. When this command is ON, tray
switching still occurs when the tray
becomes empty. When this command is
OFF, no switching occurs and the user is
prompted to load paper.