5212 and 5224 IP Phone SIP User and Administrator Guide
Dial by Phone Book Entry
1. Press
(SUPERKEY), and then press >> until PHONE BOOK? appears.
2. Press OK. PHONE BOOK <number of items> appears on the display.
3. Press
(UP) and
4. Press DIAL or # (the pound key).
5. Lift the handset (optional).
Note: To dial from your Phone Book using the Web Configuration Tool, access the tool's
Phone Book page (see Accessing the Web Configuration Tool on page 4).
Dial by Call Logs Entry
1. Press
(SUPERKEY), and then press >> until CALL LOGS? appears.
2. Press OK, and then press ▼ to navigate to the desired log type (Missed Calls, Answered
Calls or Outgoing Calls).
3. Press OK. The number of calls appears.
4. Press
(UP) and
5. Press DIAL or # (the pound key). The log is dialed and the phone returns to the default
display.
6. Lift the handset (optional).
Redial
1. Lift the handset (optional).
2. Press
(REDIAL).
Note: Your phone will not remember the last-dialed number if power is lost.
Answering Calls
Incoming calls ring Line 1, if all lines are free, or the next available line. If all lines are busy
and Call Forward – Busy is not enabled (see Enable/Disable Call Forward on page 17),
callers hear a busy signal.
When the phone rings, the Ring/Message Indicator and the associated Line key flash, and
the name of the caller appears.
Answer a Call
To answer a call, do one of the following:
• For handset mode, lift the handset.
• For headset mode, press the Headset key, then press the flashing Line key.
• For handsfree mode, press
(DOWN) to navigate to the entry you want to call.
(DOWN) to navigate through the logged call entries.
(SPEAKER).
- 14 -