Listing Fans In The System - IBM XIV User Manual

Warnings:
v ARE_YOU_SURE_YOU_WANT_TO_TURN_UPS_OFF
Completion Codes:
v UPS_IS_UNMONITORED
v UPS_NOT_ENOUGH_SPARES
v COMPONENT_DOES_NOT_EXIST
v NOT_ALL_PSUS_OK
v UPS_MUST_BE_FAILED_FOR_SHUT_OFF
v FIRMWARE_UPGRADE_IN_PROGRESS

Listing Fans in the System

Lists fans in the system.
Lists fans in the system.
Example:
Output:
User Category
Technicians
Are you sure you want to turn the UPS output power off?
Troubleshooting: Contact support
The specified UPS is not monitored and commands cannot be run on it
Troubleshooting: Contact support
There are not enough spare UPS's in the rack to safely complete the command
Troubleshooting: Contact support
Component does not exist
There is one or more PSUs disconnected or failed, this may cause the requested
action to cause module failures
Troubleshooting: Check that all PSUs are properly wired, and ensure that none
is failed
The specified UPS is not failed and therefore cannot be shut down explicitly
Troubleshooting: Contact support
Firmware upgrade in progress
Troubleshooting: Contact support
fan_list
xcli -u -c Nextra1 fan_list
Permission
Allowed
Chapter 20. Hardware Maintenance
461