Setting The Time Zone; Aborting The Upgrade To A New Software Version - IBM XIV User Manual

Setting the Time Zone

Sets the time zone of the system.
Parameters:
This command sets the new time zone of the system. See Listing Optional Time
Zones for a complete list of optional time zones.
Standard POSIX time zones are used. http://www.timeanddate.com/worldclock/
provides a full description of all time zones.
Access Control:
Completion Codes:
v BAD_TIMEZONE_NAME

Aborting the Upgrade to a New Software Version

Aborts a system upgrade process.
This command aborts the upgrade process of a new software version. In case that
I/O are not stopped, the command aborts the upgrade and returns the system to
full operation.
Access Control:
User Category
Read-only users
Technicians
timezone_set timezone=TimeZone
Name Type
timezone String
User Category
Storage administrator
Storage integration administrator
Application administrator
Security administrator
Read-only users
Technicians
Timezone is not recognized by the system
upgrade_abort_ongoing
User Category
Storage administrator
Permission
Allowed
Allowed
Description Mandatory
New time zone of the Y
system.
Permission
Allowed
Disallowed
Disallowed
Disallowed
Disallowed
Allowed
Permission
Disallowed
Chapter 9. System Management
159