Chapter 12. Data Migration; Activating Data Migration - IBM XIV User Manual

Chapter 12. Data Migration

The following sections describe the XIV Command Line Interface (XCLI) for data
migration.
The sections are listed as follows:
v
v
v
v
v
v

Activating Data Migration

Activates the Data Migration process.
Parameters:
This command activates the Data Migration process. This is either an initial
activation or an activation after de-activation.
Upon activation the Data Migration is tested in the same way as when using
Testing the Data Migration Definition and this command fails if the Data Migration
test fails.
This command has no effect if the process is already active.
Access Control:
Completion Codes:
v VOLUME_BAD_NAME
dm_activate(Activates the Data Migration process.)
dm_deactivate(Deactivates the Data Migration process.)
dm_define(Defines a Data Migration configuration.)
dm_delete(Deletes the Data Migration process.)
dm_list(Lists Data Migration configuration and status.)
dm_test(Tests the Data Migration configuration.)
dm_activate vol=VolName
Name Type
vol Object name
User Category
Storage administrator
Storage integration administrator
Application administrator
Security administrator
Read-only users
Technicians
Volume name does not exist
Description Mandatory
Destination volume for Y
Data Migration
activation.
Permission
Allowed
Allowed
Disallowed
Disallowed
Disallowed
Disallowed
239