Xerox WorkCentre 5845 Specifications page 10

Xerox WorkCentre™ 5845/5855
®
Fax
Network Server Fax Features
Compatibility
Maximum Scan Area
Fax Send Features
Fax Print Features
Transmission Resolution
Internet Fax Features
Capability
Address Directory Access
Resolution
Network Protocols
Compliance
Walk-up Fax Features (Optional (Customer-installable) – 1 and 2 lines)
Compatibility
Speed / Modems
Compression / Speed
Resolution
Fax Send Features
Fax Receive Features
Fax Forward
Fax Reports
Auto Dialing
ITU (CCITT) group 3
Various Xerox Alliance Partner Solutions
®
A3
One- or two-sided scanning (up to A3)
Add to send list (50 numbers maximum)
Build Job, Speed Dial, Delay send (specific time) Original type (photo, text or photo and text)
One- or two-sided printing, staple, Secure Print
Superfine: 400 x 200 dpi (Scan at 600 x 600 dpi)
Fine: 200 x 200 dpi
Standard: 200 x 100 dpi
Direct print-ready document transmission to remote Internet Fax machines or email clients (SMTP)
Reception and automatic printout of documents sent via email from remote Internet Fax machines or email clients
Send: Multi-page TIFF, PDF, PDF/A
Receive: TIFF, MTIFF, PDF, PDF/A, PS, text, PCL, PRN, JPEG
72 x 72 dpi to 600 x 600 dpi
Bit Depth: 1-bit (black and white)
SMTP (send), POP3 (receive)
ITU-T T.37 compliant
ITU (CCITT) Group 3
One or Two V.34 modems: 33,600 bps. Less than 4 seconds per page transmission time
ATA analogue terminal adaptor utilising T38 (optional)
MH/G3, MMR/SG3
Walkup Send:
Standard: 200 x 100 dpi
Fine: 200 x 200 dpi
Superfine: 600 x 600 dpi
Receive:
Accepts all sizes
LAN Fax (fax from print driver)
Auto fax transmission reduction
Page-by-page job status at the machine
Delay start, Build Job, Favourites
Automatic memory resend
Automatic cover sheets
PSTN Fax
Device Address Book (up to 1,000 contacts)
One- or two-sided printing
Stapled or unstapled
Receive print mode – Manual (size, margin, stock, header) / Auto
Output tray selection
Junk Fax Prevention
Up to 200 password protected mailboxes
Secure receive
Receive timestamp
Auto Answer Delay
Forward to Email or SMB Location
Fax forward on receive only
Activity, Dial directory, Group directory, Transmission confirmation, Pending fax, Options report, On demand
overwrite report, Mailbox report, Broadcast report
Speed Dials: 5,000 total (one- or two-line options)
Group Dials: Up to 200 groups with up to 400 recipients per group (one- or two-line options)
Auto Redial: Up to 14 attempts (per country requirements)
• 1 to 25 minute intervals
• Batch send (up to memory capacity)
Detailed Specifications 10