S
S
UPER
ERVER 6016TT-TF/6016TT-IBXF/6016TT-IBQF User's Manual
Figure 6-3. Mounting a Drive in a Carrier
Enterprise level hard disk drives are recommended for use in Supermicro
chassis and servers. For information on recommended HDDs, visit the
!
Supermicro Web site at http://www.supermicro.com/products/nfo/storage.
cfm
Installing/Removing Hot-swap SATA Drives
1.
To remove a carrier, push the release button located beside the drive LEDs.
2.
Swing the handle fully out and use it to pull the unit straight out (see Figure
6-4).
Figure 6-4. Removing a SATA Drive
6-4