Table of Contents
Advertisement
FS-3600 PC WorkStation
Weekly Close Time Clock
• The Weekly Close Time Clock should be performed on the day of the week that ends the
payroll period. This day must be programmed in the System Setup Table [Labor Week
End]
Path:
[System Configuration] à [System Setup] à [Orders/Labor]
NOTE 1:
A Daily Close Time Clock operation is NOT available on a labor week
ending day. The Weekly Labor Close operation will automatically
perform a Daily Close Time Clock operation.
NOTE 2:
If Weekly overtime is used a Weekly Close Time Clock operation must
be performed on the appropriate Labor Week End day to assure proper
calculation of overtime rates.
Monthly Close Time Clock
• The Monthly Close Time Clock operation can be performed at any time. Commonly it is
used to report bi-Weekly and semi-monthly labor totals.
• The Monthly Close Time Clock operation is used as a "period to date" reporting
operation. The descriptor "Monthly" can be changed to PTD by editing the Literal Table.
Path
[Strings] à [Literals] à [Literal #197 = PTD]
NOTE 1:
When a Monthly Close Time Clock is performed it will automatically
perform a Daily Close Time Clock operation.
NOTE 2:
When a Monthly Close Time Clock is performed on a week ending day
it will automatically perform a Daily, Weekly and Monthly Close Time
Clock.
- 49 -
Labor
Advertisement
Table of Contents
