Table of Contents
Advertisement
POS Configuration
Field Name
Output Buffer
• This field sets the size of the receive buffer for
• The valid range is from 2 to 4096 and it must be
Wait for Ack
• This field sets the amount of time, in
• If an acknowledgement is not received within
Wait for Resp
• This field sets the amount of time, in seconds
• If a response is not received within the specified
Monitor Stn
• This field is used to set the stations that a
• This feature can be used by double drive-thru
• Check the box for each station that this station
• EXAMPLE on the FS-3600 should be:
To monitor station 2, entry should read:
To monitor stations 1 and 3, entry should read:
Description
incoming data.
an even power of 2 (2, 4, 8, 16, etc.)
seconds that the system will wait for an
acknowledgement of receipt of a packet of data
sent over the modem.
the specified amount of time, the session will be
terminated.
that the system will wait for a response to a
request sent over the modem.
amount of time, the session will be terminated.
cashier will monitor for store-and-forward
checks.
operations so that DTOT #1 (Drive-Thru Order
Taker) can forward orders to DTC #1 (Drive-
Thru Cashier), and DTOT #2 can forward orders
to DTC #2.
should monitor, and do not check the box for
those that this station should ignore.
0100000000000000.
1010000000000000.
- 116 -
FS-3600 PC Work Station
Entry Type
4 digit Numeric
2 digit Numeric
2 digit Numeric
Check Box will
equal the 1 for
the station to be
monitored on the
FS-3600.
Advertisement
Table of Contents
