TEC FS-3600 Owner's Manual page 172

Utilities
The following tables describe sample command line parameters for PDSZ.exe. The table used is
determined by the "Close with Sales Flag" located in the FS-3600 System Configuration Table.
If the System Configuration's "Close Labor with Sales" flag is checked
Run a Daily Sales Z:
Run a Weekly Sales Z:
Run a Period Sales Z:
Run a Period (and weekly) Sales Z:
If the System Configuration's "Close Labor with Sales" flag is NOT checked
Run a Daily Sales Z:
Run a Weekly Sales Z:
Run a Period Sales Z:
Run a Period (and weekly) Sales Z:
Run a Daily Labor Z
Run a Weekly Labor Z
Run a Period Labor Z
Run a Period (and weekly) Labor Z
Run a Daily Sales and Labor Z
Run a Weekly Sales and Labor Z
Run a Period Sales and Labor Z
Run a Period (and weekly) Sales and Labor Z
Ø The Z Process utility may also be used to configure which reports print or run during
the Z process. Run PDSZ.exe with no parameters in the command line to configure
reports.
Action
Action
- 162 -
FS-3600 PC WorkStation
Command Line
PDSZ.exe /Z1 /silent
PDSZ.exe /Z1 /Z2 /silent
PDSZ.exe /Z1 /Z3 /silent
PDSZ.exe /Z1 /Z2 /Z3 /silent
Command Line
PDSZ.exe /Z1 /silent
PDSZ.exe /Z1 /Z2 /silent
PDSZ.exe /Z1 /Z3 /silent
PDSZ.exe /Z1 /Z2 /Z3 /silent
PDSZ.exe /L1 /silent
PDSZ.exe /L1 /L2 /silent
PDSZ.exe /L1 /L3 /silent
PDSZ.exe /L1 /L2 /L3 /silent
PDSZ.exe /Z1 /L1 /silent
PDSZ.exe /Z1 /L1 /Z2 /L2 /silent
PDSZ.exe /Z1 /L1 /Z3 /L3 /silent
PDSZ.exe /Z1 /L1 /Z2 /L2 /Z3 /L3 /silent