I.link (Ieee1394) - Toshiba Portege A 100 User Manual

(4) Select a resolution from the menu.

i.LINK (IEEE1394)

i.LINK (IEEE1394) is used for high-speed data transfer for a range of
compatible devices such as
■
Digital video cameras
■
Hard disk drives
■
MO drives
■
CD-RW drives
i.LINK uses a four-pin connector, which does not carry electric current.
External devices will need their own power supply.
Precautions
■
Make a back-up of your data before transferring it to the computer.
There is a possibility that the original data will be damaged. There is a
particular risk that some frames will be deleted in the case of digital
video transfer. TOSHIBA assumes no liability for such loss of data.
■
Do not transfer data in areas where static electricity is easily
generated or in areas subjected to electronic noise. Data can be
destroyed.
■
If you are transferring data through an IEEE1394 hub, do not connect
or disconnect other devices from the hub during data transfer. There is
a likelihood that data will be damaged. Connect all devices to the hub
before you turn on the computer's power.
■
You may not use any copyrighted video or music data copied from a
video camera except for your personal enjoyment.
■
If you connect/disconnect an iLINK device to/from another iLINK
device that is currently exchanging data with the computer, data
frames might be dropped.
Portégé A100
Resolution menu
Optional Devices
8-17