Table of Contents
Advertisement
8. REPLACING THE HEAD UNIT/ INK CARTRIDGE
5. Unpack a new head unit/ ink cartridge. Remove the protection pad from the head unit/ ink cartridge. 1
6. Remove the protection sheet from the head unit/ ink cartridge. 2
NOTES: 1. Do not touch the area that had been under the protection sheet with your fingers or with any
object.
2. To avoid the head unit/ ink cartridge from which the protection sheet has been removed from
getting dry, install it into the printer as soon as possible after removing the protection sheet.
3. Do not install the head unit/ ink cartridge with the protection pad and the protection sheet
attached. Doing so will damage the printer.
4. Do not remove the protection sheet while the head unit/ ink cartridge faces down. Also do
not drop or shake the head unit/ ink cartridge. Doing so may cause ink to spill over. Once
ink gets on your clothes, it cannot be removed.
7. Load the head unit/ ink cartridge onto the carriage, and then fully push it until the hook secures the
cartridge. (Refer to 5.2 LOADING THE HEAD UNIT/ INK CARTRIDGE)
8. Depress the [CARTRIDGE] switch.
The printer performs the initial operation. After the initial
operation is finished, the carriage returns to the home
position (right end), and the power LED stops blinking and
remains on.
9. Insert the two hooks into the holes on the top cover, and then
close the printer cover slowly. The ERROR LED turns off,
and the printer becomes ready to print.
NOTE: Failure to close the printer cover fully may cause an
error condition.
Protection pad
1
2
8-2
8. REPLACING THE HEAD UNIT/ INK CARTRIDGE
Protection Sheet
EO1-13013
Fig. 8-2
Advertisement
Table of Contents
