Table of Contents
Advertisement
6. REPLACING THE RECEIPT ROLL
5. Pull up the rear paper release lever (blue). 4
6. Push down the front paper release lever in direction 5, and then remove the receipt roll in direction 6.
Front Paper Release Lever
7. Return the front cover.
8. Pull down the rear paper release lever (blue).
9. Insert the two hooks into the holes on the top cover, and then close the printer cover slowly.
10. Turn the power ON by pressing and holding the [POWER]
switch.
The POWER LED and ERROR LED turn on.
11. Put the new receipt roll into the paper holder. (Refer to Section 5.3 LOADING THE RECEIPT ROLL)
12. Insert the receipt straight into the receipt inlet.
The auto loading mechanism feeds and cuts the receipt automatically.
The ERROR LED turns off, and the printer becomes
ready to print.
13. Close the paper cover slowly.
Rear Paper Release Lever (blue)
4
6
5
6-2
EO1-13013
6. REPLACING THE RECEIPT ROLL
Fig. 6-2
Advertisement
Table of Contents
