Adjusting The Alarm Beep Volume - Sharp AL-2060 Operation Manual

ADJUSTING THE ALARM BEEP VOLUME

Adjust the volume of alarm beeps (emitted at the end of transmission and reception) using the procedure below.
1
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
2
Press the [ ] key (
until "4:USER PROGRAM" appears,
and then press the [OK] key.
Selection
"4:USER PROGRAM"
3
Press the [ ] key (
until "19:BEEPER VOLUME" appears,
and then press the [OK] key.
Selection
"19:BEEPER VOLUME"
4
Press the [ ] key (
to set the alarm volume.
1,2,3,
1,2,3,
SP. FUNC
5
Press the [OK] key.
1,2,3,
1,2,3,
SP. FUNC
) or [ ] key ( )
) or [ ] key ( )
) or [ ] key ( )
The selections are as
follows:
1:OFF
2:LOW
3:MIDDLE
4:HIGH
To turn off the alarm,
select "1:OFF".
6
Press the [MENU] key.
1,2,3,
1,2,3,
SP. FUNC
Press the [MENU] key to
exit.
19
2