Charging The Battery - SENDO X User Manual

1
3. Insert the battery with the label facing up. Align
the tabs and metal contacts at the top of the
battery with the tabs and contacts on the back of
the phone. Slide into place and press down.
If you need to remove the battery, ensure your phone
is switched off, pull the small tab at the bottom of the
phone and lift the battery out.
4. Replace the cover. Place the cover onto the back
of the phone and slide the cover into place
making sure the tabs click into place.

Charging the battery

You must charge the battery for at least 4 hours
before you use the phone for the first time. After this,
the battery will normally take around 2 to 3 hours to
charge.
1. Insert the connector on the charger lead into the
connector at the base of the phone.
2. Plug the charger into a mains AC socket. When
charging commences, the battery icon
phone's screen will become animated. When the
battery is fully charged, the battery full icon
will appear and you can disconnect the charger.
Warning: To ensure that the battery icon is
accurate, you need to make sure you do a full
charge and discharge when you use any battery
for the first time.
Note: When the battery is completely
discharged it may take some time for the battery
3
on the
Sendo X User Guide