Using Your Headset - SENDO X User Manual

19
positioned correctly over your ear and that the
earloop does not cause discomfort.

Using your headset

!
To transfer to your headset
1. To transfer all audio features to your Bluetooth
headset, either:
• Press the call control button on the headset.
Accept the connection request (from your
Bluetooth headset -
Yes , or
Tip: You can accept a connection request
automatically by selecting the
option for the
headset) in the
• On your phone, go to the
Connectivity, then
Paired devices
(the Bluetooth headset), press
select Connect.
2. The headset indicator
top of the
3. All sounds normally played through your
phone's speakers, will be played through the
Sendo BTHS-01) by pressing
Set as authorised
Sendo BTHS-01 (the Bluetooth
Paired devices view (see below).
Menu screen, open
Bluetooth and navigate to the
view. Scroll to the Sendo BTHS-01
Options
will be displayed at the
Now! screen.
headset only. This includes ring tones, alerts and
key sounds.
!
To transfer to your phone
1. To transfer all audio features back to your
phone:
• Turn the headset off - press and hold the power/
mute button on the headset, or
• On your phone, go to the
Connectivity, then
Paired devices
(the Bluetooth headset), press
select Disconnect.
!
To answer a call
1. To answer a call, wait for the headset to ring,
then press the call control button.
2. If the connection to your phone fails when
answering a call, you will hear two short tones.
Check the display on your phone to continue the
call.
3. During a call, the headset indicator light will
flash green, showing a call is in progress.
!
To end a call
1. To end a call, press the call control button at any
and
time during a call.
!
To make a call
1. To make a call, dial using your phone as you
would do normally. See
for details of making calls.
155
Menu screen, open
Bluetooth and navigate to the
view. Scroll to the Sendo BTHS-01
Options
Phone Calls on Page 29
Sendo X User Guide
and