SENDO X User Manual page 58

Hide thumbs Also See for X:
Table of Contents

Advertisement

3
!
To activate a profile
1. Open the Profiles list, as described above.
2. Use the joypad to scroll to the profile you want to
activate.
3. Press
Options
!
To customise a profile
1. Open the Profiles list, as described above.
2. Use the joypad to scroll to the profile you want to
customise.
3. Press
Options
4. A list of fields that you can customise are
displayed. Use the up
keys to scroll through the list and press
to change a setting.
The following table shows a list of settings that you
can change in each profile:
Select this
Ringing tone
Incoming call
alert
Ringing volume
Message alert
tone
and select Activate.
and select Personalise.
and down
To
Select a ring tone from the list of ring tones
stored on the phone. To listen to a ring tone
just highlight it using the joypad. Press any key
to stop the sound.
Select how the phone notifies you of an
incoming call, e.g.
Ringing
for a normal ring
tone, or
Ascending
to play a ring tone with
gradually increasing volume.
Adjust the volume level of the ring tone, and
message alert tone.
Select how the phone notifies you that a new
message has been received.
Select this
Vibrating alert
Keypad tones
Warning and
game tones
Alert for
joypad
Back light
Select
Back light
timeout
Movie mode
brightness
Profile name
52
To
Select
On
to make the phone vibrate when a
call is incoming, and when a new message
has been received.
Select a volume level if you want a tone to
sound when you press a key on your phone.
Select
On
to play warning and game sounds.
Select
All calls
if you want the phone to alert
you to all calls, or select from a list of your
contact groups (if you have created any) if you
want the phone to only alert you to incoming
calls from members of that contact group. See
Creating Contact groups on Page 59
information about contact groups.
Set the brightness level for the display's back
light.
Set the time limit before the back light is
turned off, if no keys are pressed.
Set the brightness level for the display's back
light, when the phone is in "movie mode".
This mode is used by the phone for features
such as playing video clips or games, where
keys may not be pressed for long periods of
time. It means that when no keys are pressed,
the back light brightness level is set to the level
selected here, rather than the default level.
Give the preset profile a new name of your
choosing. You cannot rename the
profile.
Sendo X User Guide
for more
General

Advertisement

Table of Contents
loading

Table of Contents