Table of Contents
Advertisement
19
6. On your headset, press and hold both the call
control and volume up buttons for about 2
seconds until the indicator light begins to flash
red then green.
7. Your headset will now remain discoverable for
approximately 60 seconds.
8. On your phone, press the right
navigate to the
9. Press
Options
Your phone will search for all Bluetooth enabled
devices within the 10 metre range, and display a
list of devices found.
10. Use the joypad to scroll to the
(the Bluetooth headset), and press
will be prompted to enter a passcode. Using the
numeric keypad, enter four zeros "0000". You
do not need to memorise the passcode as it is
used only once.
11. Your Bluetooth headset is now added to the
paired devices list, which is displayed when you
open the
Paired devices
12. When pairing is successful, the headset will
sound a tone and return to standby mode.
See
Using your headset on Page 155
and receiving calls using your headset.
Note:
If pairing is not completed within 60
seconds, the headset will return to on/standby
mode without sounding a success tone. Repeat
the pairing process.
joypad key to
Paired devices
view.
and select
New paired
Sendo BTHS-01
Select
view.
before making
!
To wear your headset
Note:
To remove an earloop, simply unsnap the
earloop from the headset by pulling gently at
the base of the earloop ring.
1. To wear the headset on your right ear, turn the
earloop so the letter R is facing outward. Snap it
onto the headset by applying gentle pressure on
the base of the earloop ring.
device.
To wear the headset on your left ear, turn the
earloop so the letter L is facing outward. Snap it
onto the headset by applying gentle pressure on
the base of the earloop ring.
Note:
Your headset is provided with a small-size
. You
earloop and a larger earloop. Use the earloop
that gives you the best speaker/microphone
position and the best comfortable fit.
2. Slide the headset over your ear - using one
hand, gently slide the earloop behind your ear in
a twisting motion until you achieve a
comfortable fit.
3. Adjust the microphone so it aligns with your
mouth. Make sure that the headset speaker is
154
Sendo X User Guide
Advertisement
Table of Contents
