SENDO X User Manual page 51

Hide thumbs Also See for X:
Table of Contents

Advertisement

3
Select this
Dial-up number
User name
Prompt password
Password
Authentication
Gateway IP
address
Homepage
Connection
security
Session mode
Data call type
To
Enter the modem telephone number of the
access point (for GSM data only).
Enter a user name. This may be needed to
access some services, and should be obtained
from your service provider.
Select
Yes
to be prompted for a new password
every time you make a data connection, or
to save the password entered on the phone.
Enter a password. This may be needed to
access some services, and should be obtained
from the service provider. Passwords are
usually case-sensitive. When you type in a
password, the characters that you have typed
are displayed very briefly, before being
replaced by asterisks (*), for security purposes.
To type a number in a password, press the
key
and select
Insert
number.
Select Normal, or
Secure.
Enter the IP address of the browser gateway.
You can obtain this from your service provider.
Enter either the service address, or the address
of the multimedia messaging centre,
depending on the access point type required.
Select
Yes
to use Transport Layer Security (TLS)
for the connection. Check with your service
provider for more information.
Select Permanent, or Temporary.
(For GSM data only). Select from Analogue,
ISDN
v.110, or
ISDN
v.120. ISDN connections
are digital, and faster than an analogue
connection. However, you should check with
your Internet and network service provider(s)
whether ISDN connections are supported.
Select this
To
Maximum data
(For GSM data only). Set a maximum speed
speed
for data transmission - you can choose from a
range of values. Faster rates of data
transmission may cost more - check with your
service provider.
You can enter further, advanced data connection
settings, by pressing
No
Advanced
settings. The following advanced options
are available:
Select this
To
Phone IP address
The IP address of your phone. Contact
your Internet service provider to obtain IP
addresses.
Primary name
The IP address of the primary DNS
Edit
server
(Domain Name Service) server. A DNS is a
service that translates website names, e.g.
http://www.sendo.com, into IP addresses.
Second name
The IP address of a secondary DNS server.
server
Server address
Enter the web address for the server.
Port number
Enter a number for the port.
Use callback
(GSM only). This option allows a server to
call you back once you have made the
initial call, so you have a connection
without paying for the call. Contact your
service provider to subscribe to this
service.
Callback type
(GSM only). The options are
no.
provider for the correct setting to use.
Callback
(GSM only). Key in your phone's data
number
phone number which the dial back server
uses. Usually, this number is the data call
phone number of your phone.
45
Options
and selecting
Use server
/
Use other
no. Ask your service
Sendo X User Guide

Advertisement

Table of Contents
loading

Table of Contents