Table of Contents
Advertisement
5
!
To assign default numbers and addresses
1. Open the required contact card, or create a new
one, as shown above.
2. Press
Options
3. Use the joypad to scroll to the field you want to
assign, for example
Assign
4. Scroll through the list of numbers or addresses
shown, and highlight the one you want to set as
the default.
5. Press
Select
Note:
When you view the contact card again,
the default phone number, address, etc., which
you have set up will be underlined.
!
To add a thumbnail image to a contact card
1. Open the required contact card, or create a new
one, as shown above.
2. Press
Options
3. Press
Options
thumbnail.
4. The thumbnail images stored in your
Album
will be displayed - use the joypad to scroll
through them and press
thumbnail to attach.
Note:
When you have attached a thumbnail
image to a contact card, if that contact calls
your phone, the image will be displayed on the
Incoming Call screen next to the contact's
name.
and select Defaults.
Phone
number, and press
.
.
and select Edit.
again and select
Select
to choose the
!
To assign a ring tone to a contact card
1. Open the required contact card, or create a new
one, as shown above.
2. Press
3. A list of available ring tones will appear - scroll
to the one you want to choose, and press
Select
Tip:
contact card, press
tone, then select
Note:
contacts. See
Page
different ring tones, one individually, and one as
part of a contact group, whichever was
assigned most recently will be used.
Shortcuts to calling a contact
If your Contacts directory is very long, having to
scroll through pages of names to find a contact is
Add
inconvenient. There are a number of shortcuts
available from the
Photo
for you to call a contact.
!
To call a contact using voice dialling
1. Press and hold the
2. When prompted, say the command
Dial" clearly into the microphone.
3. When prompted, say the name of the contact
you wish to call, clearly into the microphone. You
58
Options
and select
.
To remove an assigned ring tone from a
Options
Default tone
You can assign a ring tone to a group of
Creating Contact groups on
59. If a contact has been assigned two
Now!
screen to make it quicker
Voice
key
Ring
tone.
and select
Ring
from the list.
.
"Name
Sendo X User Guide
Advertisement
Table of Contents
