Remote Pool Thermometer Sensor Set Up - Kogan KAPOLTHERMA User Manual

1.2

Remote Pool Thermometer Sensor Set Up

Note: To avoid permanent damage, please take note of the battery
polarity before inserting batteries.
1. Twist off the transmitter cover (counterclockwise), as shown in
Figure 1 (overleaf). Be careful not to stress the sensor wire.
Figure 1
2. Insert two AA batteries and close the battery door, as shown in
Figure 2. Take care not to pinch the sensor wire.
Figure 2
3. Locate the dip switches on the inside cover of the lid of the
transmitter.
Figure 3 displays all three switches in the OFF position.
Version 1.4 Page 3