Display Console Layout - Kogan KAPOLTHERMA User Manual

update remote temperature on the display within a few minutes. Do
not touch any buttons until the remote sensor reports in, otherwise
the remote sensor search mode will be terminated, and you must
power down and power up the console again by removing batteries.
When the remote sensor data has been received, the console will
automatically switch to the normal mode, and all further settings can
be performed.
If the remote does not update, please reference the troubleshooting
guide in Section 7.
1.4

Display Console Layout

Note: The following illustration shows the full segments of the
receiver LCD for description purposes only and will not appear like this
during normal operation.
Figure8
1. Transmitter channel number
2. Water temperature units (°F vs. °C)
3. Water temperature
4. Indoor temperature units (°F vs. °C)
5. Indoor temperature
Version 1.4 Page 6