Min/Max Mode; C/°F Units Of Measure; Multi-Channel Operation; Multi-Channel Sensor Initialization - Kogan KAPOLTHERMA User Manual

Professional wireless pool thermometer

Table of Contents

1.9

Min/Max Mode

Note: If you have multiple remote temperature sensors, select the

Channel you wish to view the min/max data before you enter the

min/max mode.

Note: Resetting the minimum and maximum values resets all three

channels at the same time for multi-channel operation.

1. Minimum Values. While in Normal Mode, press the MIN/MAX

button to enter the min/max mode. The minimum water

temperature and indoor temperature will be displayed. Press the

CLEAR button (on the top of the display) to clear the minimum

values to the current measured values.

2. Maximum Values. Press the MIN/MAX button again, and the

maximum water temperature and indoor temperature will be

displayed. Press the CLEAR button (on the top of the display) to

clear the maximum values to the current measured values.

3. Press the MIN/MAX button again to exit the min/max mode.

1.10 °C/°F Units of Measure

To toggle between °C/°F temperature units of measure on the

display, press the C/F button on the back of the display.

The KAPOLTHERMA supports up to three remote thermometers (only

one is included in the package).

Place the multiple remote sensors about 10 feet from the console.

Power up the sensors and console in the following order:

1. Power up the first remote thermometer and set the channel

number dip switches, as described in Section 1.3. Verify the

display reads Channel 1.

2. Power up the second remote thermometer and set the channel

number dip switches, as described in Section 1.3. Verify the

display reads Channel 2.

Version 1.4

Page 10

Table of Contents