Sensor Location; Connecting The Probe - Kogan KATMRBBQWLA User Manual

KATMRBBQWLA E-user manual
SENSOR LOCATION (Figure 7)
You can wear the monitor on your belt or stand it up on a flat surface. To stand it up,
remove the belt clip from the back of the monitor. Insert the left or right side of the
clip into the lower part of the slot, and then snap the other side into the other lower
slot.
CONNECTING THE PROBE (Figure 2)
Locate the probe socket cover on the top right side of the thermometer sensor and
carefully pull it out. Plug the wire end of the meat probe into the socket.
5