The first time the warewasher is used, a litre of water must be poured into the
tank with the salt.
Whenever the tank is filled, always take care to ensure that the cap is firmly
closed.
The mixture of water and detergent must not get into the salt tank, as this would
impair operation of the regeneration system.
In this case warranty cover will be forfeited.
Whenever the type of detergent or rinse aid is changed, it is ABSOLUTELY ESSENTIAL to flush out
the peristaltic pumps by placing the external intake pipes in water for a few cycles.
Always use only products specifically recommended for use in a warewasher.
Failure to comply with this recommendation leads to forfeiture of the warranty entitlement on
the appliance's water system.
The internal pipes of the detergent and rinse aid pumps should be replaced by the After‐Sales
Service every 12 months and the diaphragm rinse aid pump should be checked.
CW/CWH – 511 MDA
IMPORTANT:
13