PROBLEM
STAINS ON GLASSES AND
CUTLERY
WATER IN TANK AFTER
PUMP‐OUT
DISHES NOT PROPERLY
DRIED
CW/CWH – 511 MDA
POSSIBLE CAUSE
Rinse aid unsuitable or not
being delivered correctly.
Water hardness above 12°dF or
large amounts of dissolved salts
Drain hose incorrectly
positioned or partially
obstructed.
Low rinsing temperature due to
thermostop OFF
28
POSSIBLE REMEDY
Check container of rinse aid and
whether it is suitable for the type of
mains water. If the problem persists,
contact the after‐sales service.
Check that the drain hose is not
blocked, bent or crushed.
Check height of drain hose (see
pag.7)
Switch thermostop ON.
If the problem persists call the after‐
sales service