Vertex Standard Pilot VXA-210 Operating Manual page 45

07 [ LAMP ]
Function: Display and Keypad Illumination Mode
Available Values: KEY/TGL/5
Default Setting: KEY
In the "KEY" mode, the lamp will be activated for 5
seconds when any front panel key is pressed.
In the "TGL" mode, the LAMP switch toggles the
lamp on and off.
In the "5" mode, the LAMP switch activates the lamp
for 5 seconds.
08 [ SFT ]
Function: CPU Clock Shift
Available Values: on/oFF
Default Setting: oFF
This function is only used to move a spurious response
"birdie" should it fall on a desired frequency. Consult
your Yaesu dealer for details regarding this function.
09 [ PRTM ]
Function: Priority Checking Time
Available Values: 05/10/15/20/25/30 (x0.1 sec)
Default Setting: 15 (1.5 seconds)
This Menu item allows you to define how often the
Priority Channel will be checked for activity.
Note: The Dual Watch Polling time is 500 mS (fixed).
VXA-210 P O
ILOT PERATING
( )
M "S "
ENU ET
10 [ DWMD ]
Function: Select the Dual Watch/Priority Function
Available Values: DW/PRI
Default Setting: DW
In the DW mode, the VXA-210 will activate the Dual
Watch feature when you press [ F ] à [ SCAN ( DW )] .
In the PRI mode, the VXA-210 will activate the Pri-
ority feature when you press [ F ] à [ SCAN ( DW )] .
11 [ POBP ]
Function: Select the Power on Beep
Available Values: 0/1/2/3
Default Setting: 1
12 [ IMIC ]
Function: Internal Microphone On/Off
Available Values: on/oFF
Default Setting: oFF
This controls the status of the radio's internal micro-
phone when an external microphone (such as the MH-
44
nected via the CT-60 Headset Cable) is in use. In most
applications, set 12 [ IMIC ] to "oFF" for proper op-
eration (this disables the internal microphone). The
internal microphone will still function normally when
the external microphone is disconnected.
M
ANUAL
M
ODE
Speaker Microphone or an aviation headset con-
A4B
43