How To Measure The Rarometric Pressure Or Altitude; Weather Sensor Mode - Vertex Standard Pilot VXA-210 Operating Manual

How to Measure the Barometric Pressure
or Altitude
r Press [ F ] à [ 6
( SENSR )] ; the dis-
play will show cur-
rent temperature.
r Rotate the DIAL
knob to select the
desired sensor (see
next page).
r Press the [
(
ment units of the current sensor (or On/Off the
Pressure Graph).
r Press the PTT key exit to normal operation.
24
B P
AROMETRIC RESSURE
2 3
5 6
8 9
0 F
)] key to change the measure-
/A M
LTITUDE ETERING

Weather Sensor Mode

The Weather Sensor Mode allows the user to ac-
tivate only the sensor and display circuits of the
VXA-210, for use of the radio solely as a weather
monitor. With the "radio" circuits not being acti-
vated, battery consumption is reduced signifi-
cantly.
1. Press and hold in the MONITOR and LAMP
keys while turning the radio on, activate the
Weather Sensor Mode.
2. Turn the DIAL knob to select the desired sen-
sor among from the "TEMP," "BARO,"
"ALTI," "GRPH," and "D.ALT" selection.
3. Press the [ (
surement units of the current sensor, if de-
sired.
4. Turning the radio off, then on again, will re-
turn the VXA-210 to normal operation.
VXA-210 P
ILOT
)] key to change the mea-
O M
PERATING ANUAL