Settings (4) - Husqvarna Automower 230 ACX Operator's Manual

Advanced (3-4)
• Drive past wire (3-4-1)
The front of Automower
boundary wire by a specific distance before the
mower turns. The default distance is 11" (27 cm),
but this can be changed if required. The
minimum value is 6" (15 cm) and the maximum
value is 20" (50 cm).
To adjust the distance: Move the cursor to Drive
past wire and press YES. Now specify the
number of centimeters you want Automower
pass the boundary wire.
• Ground speed (3-4-2)
When Automower
®
the recommended maximum area, the speed
can be reduced. The advantage of this is
reduced wear on the mower and somewhat more
even speed on steep hills.
To change the speed: Set the marker to Ground
speed and press YES. Then choose between
Normal and Reduced speed by moving the
marker to your selection and pressing YES.
(Speed setting not available on 220 AC)

6.6 Settings (4)

From this option in the main menu you access the
settings.
• Security (4-1)
to make settings concerning PIN code, time lock
and alarm. The PIN code must be specified for
the Security menu to be shown.
• Sounds (4-2)
to activate/deactivate audio messages for mower
activities and to activate/deactivate keypad
sounds.
• Language (4-3)
to select the menu language.
• Time and date (4-4)
to set the current time and day as well as the
required time and date format.
6. MENU FUNCTIONS
® always passes the
is run on areas smaller than
Exit angles
Follow loop
Installation shape
Advanced
® to
Utfartsvinklar
Följa slinga
Trädgårdsform
Avancerat
Commands
Timer
Installation
Settings
Check loop
Ground speed
3-4
3-4-1
Check loop
Ground speed
3-4
3-4-2
Security
Sounds
Language
4
Time and date
4-
English - 57