Husqvarna Automower 230 ACX Operator's Manual page 51

• Proportion first (3-1-6)
When you use two exit sectors: Specify a
percentage to define on how many occasions
Automower should leave the charging station in
®
sector 1.
To test the settings in Exit angles: State the value
100 % for Proportion first when sector 1 is to be
tested. State the value 0 % for Proportion first
when sector 2 is to be tested. Place Automower
in the charging station and select the Test OUT
(3-2-5) function. The mower will now leave the
charging station directly according to the settings
under Exit angles. Reset the Proportion first value
when testing is finished. For more information
about Test OUT (3-2-5), see page 55.
Follow loop (3-2)
These functions in this sub-menu are for situations
when the mower needs to be guided to reach remote
areas, to find the charging station more easily, and to
determine at what distance the mower shall follow the
loop. You will also find test functions here to see how
different charge exit settings work and how the
mower finds its way into the charging station.
• Follow loop out (3-2-1)
This function means that Automower
to follow the boundary wire or a guide wire away
from the charging station to reach a more remote
area of the garden. This function is very useful in
gardens where the front and back are joined by a
passage where the charging station cannot be
placed.
When this function is activated Automower
follow the boundary wire or guide wire away from
the charging station in the set direction. It will
start mowing when it reaches the area.
6. MENU FUNCTIONS
®
® can be set
® will
Exit angles
Follow loop
Installation shape
Advanced
3-2
Follow loop out
Follow loop in
Corridor width
Test IN
Test OUT
3-2-
English - 51