Charging The Battery; Installation Of The Boundary Wire - Husqvarna Automower 230 ACX Operator's Manual

IMPORTANT INFORMATION
Do not tread or walk on the charging station
plate.

3.3 Charging the battery

Automower
® is supplied with an uncharged battery. As
soon as the charging station is connected, it is possible to
charge the mower.
1. Set the main switch to the OFF position.
Automower
2. Place ®
charge the battery while you are laying the
boundary wire.
From an uncharged state the battery takes about
1 1/2 to 2 1/2 hours until it is fully char
IMPORTANT INFORMATION
Automower ® cannot be used before the
installation is complete.

3.4 Installation of the boundary wire

The boundary wire can be installed in one of the
following ways:
• Securing the wire to the ground with staples.
It is preferable to staple down the boundary cable,
if you want to make adjustments to the boundary
wire during the first few weeks of operation.
• Bury the wire.
It is preferable to bury the boundary wire if you
want to dethatch or aerate the lawn.
If necessary both methods can be combined so one
part of the boundary wire is stapled down and the
remainder is buried.
3. INSTALLATION
in the charging station to
ged.
English - 21