Performing Several Commands In Sequence Automatically (Macro Play) - Sony RM-LJ304 Operating Instructions Manual

Performing Several Commands in Sequence Automatically
(Macro Play)
The Macro Play function lets you link several IR codes in
a sequential order as a single command. The remote
provides 2 macro lists (MACRO 1 and 2). You can specify
up to 8 IR codes for each macro list.
Setting the sequence of IR codes
1
Press SET UP.
The set up list appears.
IR SET
LEARNING
DOWNLOAD
AUTO POWER
2
Move the easy scroll key to select "IR SET," then
press the key to enter the selection.
The IR SET list appears.
<IR SET>
[ MACRO 1 ]
[ MACRO 2 ]
EXIT
3
Move the easy scroll key to select "MACRO 1" (or
"MACRO 2"), then press the key to enter the
selection.
The PROGRAM list appears.
Program No.?
Macro 1-1
Macro 1-2
Macro 1-3
4
Move the easy scroll key to select the macro step
number ("Macro 1-1" for example) then press the
key to enter the selection.
The CATEGORY list appears.
CATEGORY?
Button
VCR
T V
5
Move the easy scroll key to select the component
category ("VCR" for example) then press the key to
enter the selection.
The MAKER list appears.
MAKER?
Sony VTR1
Sony VTR2
Sony VTR3
6
Move the easy scroll key to select the maker, then
press the key to enter the selection.
The FUNCTION list appears.
FUNCTION?
* NO SET
* ALL/OFF
* WAIT TIME
7
Move the easy scroll key to select the IR code for
the operation you want to perform, then press the
key to enter the selection.
The PROGRAM list reappears.
Program No.?
Macro 1-1 x
Macro 1-2
Macro 1-3
8
Repeat steps 4 through 7 to program up to 8 IR
codes.
When you have finished programming IR codes,
select "EXIT" in step 7.
To use learned codes under the Macro Play
function
Move the easy scroll key to select "Button" in step 4, then
press the key to enter selection.
Similarly, move the easy scroll key to select the button of
the learned codes. When selecting a button, you can press
the button directly, instead of scrolling down the list, to
jump to the desired button in the list and transmit the IR
code.
To cancel programming
Move the easy scroll key to select "EXIT" or "CANCEL"
during any step, then press the key to enter the selection.
To erase a programmed IR code
Move the easy scroll key to select "NO SET" from the
FUNCTION list, then press the key to enter the selection.
To turn off all connected Sony components
(SYSTEM STANDBY)
Move the easy scroll key to select "ALL OFF" from the
FUNCTION list, then press the key to enter the selection.
However, this function cannot apply to some Sony
components.
To delay the output of an IR code
Move the easy scroll key to select "WAIT TIME" from the
FUNCTION list, then press the key to enter the selection.
This allows you to specify a 1 to 10 second delay (in
1 second increments) before outputting the IR code.
17