Performing Several Commands In Sequence Automatically (Macro Play) - Sony RM-LP211 Operating Instructions Manual

Performing several
commands in sequence
automatically (Macro Play)
The Macro Play function lets you link several
IR codes in a sequential order as a single
command. The remote provides 2 macro lists
(MACRO 1 and 2). You can specify up to 16
IR codes for each macro list.
Setting the sequence of IR
codes
1
Press RM SET UP.
The set up list appears.
p
2
Move the easy scroll key to select "IR
SET", then press the key to enter the
selection.
The IR SET list appears.
p
3
Move the easy scroll key to select
"MACRO1" (or "MACRO2"), then press
the key to enter the selection.
The program list appears.
p
GB
16
4
Move the easy scroll key to select the
macro step number ("1-NO SET" for
example) then press the key to enter
the selection.
The category list appears.
p
5
Move the easy scroll key to select the
component category ("VCR" for
example), then press the key to enter
the selection.
The maker list appears.
p
6
Move the easy scroll key to select the
maker, then press the key to enter the
selection.
The function list appears.
p
7
Move the easy scroll key to select the
IR code for the operation you want to
perform, then press the key to enter the
selection.
The program list reappears.
p
8
Repeat steps 4 through 7 to program
up to 16 IR codes.
When you have finished programming IR
codes, select "Exit" in step 7.