Connections; Source Connections; Power Connections - Harman Kardon SB 15/230 User Manual

Connections

Source Connections

Analog: Use the supplied stereo audio cable to connect the soundbar's Source 1
(analog) input to your TV's stereo audio output . If your TV has two sets of audio
output jacks, use the set that has a fixed (not variable) output level . This will let you
turn your TV's speakers all the way off while the TV still supplies a constant audio
signal to the soundbar .
Digital: If your DVD player, cable tuner or satellite tuner has a coaxial digital output,
you can use a coaxial digital audio cable (not supplied) to connect it to the soundbar's
Source 2 (digital) input .
NOTE: If your DVD player, cable tuner or satellite tuner does not have a coaxial digital
output, you can connect its analog audio output to your TV . The TV will send its audio
signal to the soundbar through the analog connection described above .

Power Connections

After you have made and verified all of the source connections above:
1 . Connect the DC power supply to the soundbar's power connection . Then plug the
supplied AC cord into the DC power supply and into an active, unswitched AC
outlet . DO NOT plug this cord into the accessory outlets found on some audio
components .
2 . Plug the subwoofer's power cord into an active, unswitched AC outlet . DO NOT plug
this cord into the accessory outlets found on some audio components .
SB15CNTR
Rear Panel
TV
SB15CNTR Soundbar
Power
Connection
Power Supply
7
AUDIO
OUT
Stereo Audio Cable
(supplied)
DVD Player
COAXIAL
DIGITAL
OUT
AC Power Cord
Coaxial
Digital Audio
Cable
(not supplied)