Harman Kardon HKTS 5 Owner's Manual

Harman Kardon HKTS 5 Owner's Manual

Home theater speaker systeь
Hide thumbs Also See for HKTS 5:

Advertisement

HKTS 5
Home theater speaker system
Owner's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HKTS 5 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Harman Kardon HKTS 5

  • Page 1 HKTS 5 Home theater speaker system Owner’s Manual...
  • Page 2: Included Items

    In addition, a few minutes spent learning the functions of the various controls will enable you to take advantage of all the power and refinement the HKTS 5 is able to deliver. If you have any questions about this product, its installation or its operation, please contact your dealer, the best local source of information.
  • Page 3 HKTS 5 HKTS 160SUB Rear-Panel Connections HKTS 160SUB Rear-Panel Connections Crossover control Phase switch Power On Mode switch Subwoofer Level control Line-Level LFE connector Power switch Power cord Crossover control: This knob adjusts the subwoofer's cutoff between 50Hz and 150Hz.
  • Page 4: Speaker Placement

    Place the front speakers the same distance from each other as they are from the listening position (the place where you'll be when you listen to the HKTS 5). They should be placed they may be placed on a wall behind the listening position, facing forward. The surround speakers should not call attention to themselves.
  • Page 5 HKTS 5 Mounting Options 3. Bring the speaker cable through the wall-bracket attachment plate, and mount the You can pivot the wall-mounted speaker from side to side; however, attempting to tilt it attachment plate on the wall in the desired location.
  • Page 6: Speaker Connections

    Gently tug on the wire to make sure that Although the HKTS 5 system has red and black collars on the individual speaker terminals it is fully inserted.
  • Page 7: Operation

    HKTS 5 Speaker Connections and Operation Operation Turning the Subwoofer On and Off Set the HKTS 160SUB’s Power switch to the "ON" position. • If the Power On Mode switch is set to "AUTO", the HKTS 160SUB will automatically turn itself on when it receives an audio signal, and it will go into standby mode when it has received no audio signal for 15 minutes.
  • Page 8: Troubleshooting

    This unit is designed for trouble-free operation. Most problems users encounter are due to operating errors. So if you have a problem, first check this list for a possible solution. If the problem persists, consult your authorized harman kardon service center.
  • Page 9: Specifications

    HKTS 5 HKTS 5 Specifications Specifications HKTS 5 System Frequency response: 45Hz – 20kHz (–6dB) Satellites Center HKTS 160SUB Subwoofer Recommended power: 10 – 80 watts 10 – 80 watts Power requirement: AC 120V, 60Hz (USA) AC 220V – 240V, 50/60Hz (EU)
  • Page 10 8500 Balboa Boulevard, Northridge, CA 91329 USA © 2012 HARMAN International Industries, Incorporated. All rights reserved. Harman Kardon is a trademark of HARMAN International Industries, Incorporated, registered in the United States and/or other countries. Dolby, Pro Logic and the double-D symbol are registered trademarks of Dolby Laboratories. DTS is a registered trademark of DTS, Inc.

Table of Contents