Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Harman Kardon HKTS 9
Summary of Contents for Harman Kardon HKTS 9
- Page 1 HKTS 9/16 Home Theater Speaker System Owner’s Manual...
-
Page 2: Hkts 9/16
HKTS 9/16 Important Safety Instructions Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -
Page 3: Table Of Contents
HKTS 9/16 Table of Contents IMPORTAnT SAFeTy InSTRUCTIOnS InTRODUCTIOn DeSCRIPTIOn AnD FeATUReS InClUDeD ITeMS HKTS 210SUB ReAR-PAnel COnneCTIOnS SPeAKeR PlACeMenT MOUnTIng OPTIOnS SPeAKeR COnneCTIOnS OPeRATIOn TROUBleSHOOTIng SPeCIFICATIOnS... -
Page 4: Introduction
(or preamp/processor), amplifier and other devices are correct. In addition, a few minutes spent learning the functions of the various controls will enable you to take advantage of all the power and refinement the HKTS 9/16 is able to deliver. -
Page 5: Hkts 210Sub Rear-Panel Connections
HKTS 9/16 HKTS 210SUB Rear-Panel Connections HKTS 210SUB Rear-Panel Connections Phase switch : The Phase switch 0 determines whether the HKTS 210SUB’s External Trigger input : Use the mini-plug of the supplied combination lFe and piston-like action moves in and out in phase with the satellite speakers. If the... -
Page 6: Speaker Placement
If that is not possible, position (the place where you'll be when you listen to the HKTS 9/16). They should be they may be placed on a wall behind the listening position, facing forward. The surround placed at about the same height from the floor as the listener’s ears will be. -
Page 7: Mounting Options
HKTS 9/16 Mounting Options Wall-Mounting the Center Speaker Bring the speaker cable through the wall-bracket attachment plate, and mount the attachment plate on the wall in the desired location. Determine the location for the speaker. If possible, position the speaker so that one of the mounting screws (not included;... -
Page 8: Speaker Connections
Although the HKTS 9/16 system has red and black collars on the individual speaker terminals to denote the positive and negative connections, your system includes a colored band on the positive lead at both ends of every speaker cable and a matching colored sticker for each of the four satellite speakers, conforming to the key on page 6. - Page 9 HKTS 9/16 Speaker Connections Front left Speaker Cable (White Bands) Center Speaker Cable (green Bands) Front Right Speaker Cable (Red Bands) FRONT SURROUND CENTER Set Input Mode Switch + – + – to “normal” RIGHT LINE-LEVEL LEFT OUTPUTS + –...
-
Page 10: Operation
HKTS 9/16 Speaker Connections, Operation Speaker Connections (continued) Connecting to a Trigger-Voltage Source If your preamp/processor or another audio/video component has a trigger-voltage Receiver connection that supplies between 3V and 30V (AC or DC), connect it to the HKTS 210SUB’s External Trigger Input connector 5. -
Page 11: Troubleshooting
This unit is designed for trouble-free operation. Most problems users encounter are due to operating errors. So if you have a problem, first check this list for a possible solution. If the problem persists, consult your authorized harman kardon service center. -
Page 12: Specifications
HKTS 9/16 Specifications Specifications HKTS 9 System Frequency Response 45Hz – 20kHz (-6dB) SAT-TS7 Satellites Cen-TS7 Center HKTS 210SUB Subwoofer Recommended Power 10 ~ 80 watts 10 ~ 80 watts Power requirement AC 100–120V, 50/60 Hz, 200W (USA) Impedance 8 ohms nominal 8 ohms nominal AC 220–240V, 50/60 Hz, 200W (eU) - Page 13 HKTS 9/16...
- Page 14 Made in P.R.C. © 2010 Harman International Industries, Incorporated. All rights reserved. harman kardon is a trademark of HARMAn International Industries, Incorporated, registered in the United States and/or other countries. Dolby, Pro logic and the double-D symbol are registered trademarks of Dolby laboratories.