Changing The Default Setting Of The Amplifier - Sharp HT-X1H Operation Manual

Changing the default setting of the amplifier

HT-X1H
ENGLISH
Change settings according to the connected speakers.
Speaker delay setting (See page 54.)
Speaker level setting (See page 55.)
Test tone (See page 55.)
Example:
If the right surround speaker is 3.3 m away from the listening posi-
tion, change settings as shown below (adjust the SR).
CT
FR
FL
SW
SL
Default setting: 2 m
1 In "Speaker delay setting", set the right surround speaker (SR)
to 3.3 m.
2 In "Speaker level setting", slightly increase the level of the right
surround speaker as it is a little farther than others (see page
55).
3 In "Test tone", check the sound from each speaker (see page
55).
E-53
CT
FR
FL
SW
3.3 m
SR SL
SR
Speaker type Delay range
FL Front speaker (Left) 0.1 to 9.0 m
CT Centre speaker 0.1 to 9.0 m
FR Front speaker (Right) 0.1 to 9.0 m
SR Surround speaker (Right) 0.1 to 9.0 m
SL Surround speaker (Left) 0.1 to 9.0 m
SW Subwoofer/amplifier unit
Default settings:
Delay - - - 2 m
Level - - - 0 db
04/10/16 HT-X1H(H)E6.fm
If you press during
the operation, you
can go back one step.
Level range
- 6 db to + 6 db
- 6 db to + 6 db
- 6 db to + 6 db
- 6 db to + 6 db
- 6 db to + 6 db
- 10 db to + 10 db
TINSZA030SJZZ