Changing The Default Setting Of The Amplifier - Sharp HT-X15H Operation Manual

Changing the default setting of the amplifier

HT-X15H
ENGLISH
Change settings according to the connected speakers.
Speaker delay setting (See page 56.)
Speaker level setting (See page 57.)
Test tone (See page 57.)
Example:
If the right surround speaker is 3.3 m (10 feet) away from the listen-
ing position, change settings as shown below (adjust the SR).
CT
FR
FL
SW
SL
SR
Default setting: 2 m (6 feet)
1 In "Speaker delay setting", set the right surround speaker (SR)
to 3.3 m (10 feet).
2 In "Speaker level setting", slightly increase the level of the right
surround speaker as it is a little farther than others (see page
57).
3 In "Test tone", check the sound from each speaker (see page
57).
E-55
CT
FR
FL
SW
3.3 m
SL
(10 feet)
SR
FL Front speaker (Left)
CT Centre speaker
FR Front speaker (Right)
SR Surround speaker (Right)
SL Surround speaker (Left)
SW Subwoofer/amplifier unit
Default settings:
Delay - - - 2 m (6 feet)
Level - - - 0 dB (FL, CT, FR, SR, SL), + 5 dB (SW)
05/6/7
If you press during
the operation, you
can go back one step.
Speaker type Delay range Level range
0.1 to 9.0 m - 6 dB to + 6 dB
0.1 to 9.0 m - 6 dB to + 6 dB
0.1 to 9.0 m - 6 dB to + 6 dB
0.1 to 9.0 m - 6 dB to + 6 dB
0.1 to 9.0 m - 6 dB to + 6 dB
- 10 dB to + 10 dB
HT-X15H(H)E6.fm TINSZA064SJZZ