Sharp HT-X1H Operation Manual page 27

! Connecting the AC power lead
After checking all the connections have been made correctly, plug
the AC power lead to the AC power input socket of the subwoofer/
amplifier unit, and then to the wall socket.
Cooling fan
Wall socket
(AC 230 V, 50 Hz)
Notes:
" Never use a power lead other than the one supplied. Otherwise,
a malfunction or an accident may occur.
" Unplug the AC power lead from the wall socket if the subwoofer/
amplifier unit will not be in use for a prolonged period of time.
Cooling fan:
A cooling fan is built into this subwoofer/amplifier unit for better heat
radiation. Do not cover the opening in this section with any obsta-
cles to avoid damage to the subwoofer/amplifier unit.
! To turn the power on
Press the ON/STAND-BY button.
If the power does not turn on, check if the AC power lead and sys-
tem connection cable are plugged in properly.
To set the system to stand- by mode:
Subwoofer/
Press the ON/STAND-BY button again.
amplifier unit
Note:
After the system enters the power stand- by mode, wait a few sec-
onds to turn on again.
Subwoofer/
amplifier unit
04/10/16
Main unit
HT-X1H(H)E2.fm
TINSZA030SJZZ
HT-X1H
ENGLISH
8
E-20