Recording; Hi-Fi Stereo Sound System; Otr (One Touch Recording) - Sharp DV-NC100 Operation Manual

Vcr/dvd combination
Table of Contents

Advertisement

VCR OPERATION

Recording

Viewing and Recording the Same Programme
1
Insert a cassette tape with its erase-prevention tab in
place. (If necessary, rewind or fast forward the tape to the
point at which you want to begin recording.)
2
Press the numerical buttons or CH (o o /p p ) to select the
channel to be recorded.
3
Press TAPE SPEED/SYSTEM to select the tape speed
(SP/LP).
4
Press REC/OTR to begin recording.
• The REC indicator on the display comes on.
5
Press STOP when recording is completed.
Skipping unwanted Programme Material during Recording
1
Press STILL/PAUSE when you want to temporarily halt
recording.
• You can check the remaining pause time with
on the TV screen. Each
After 5 minutes, the VCR will automatically switch to
the Stop mode to prevent tape damage.
2
Press STILL/PAUSE or REC/OTR to resume recording.
Recording one Programme while viewing another
You can record one programme while viewing another. To
start recording, follow steps
Recording the same Programme". Then, set the TV to the
channel you want to watch.
To monitor the progress of your recording
Select the video channel on the TV.
Assemble Function
You can record in continuation from previous programme on
a pre-recorded tape.
1
Insert a pre-recorded tape. Press PLAY to start playback.
2
Press STILL/PAUSE at the desired point on the tape.
3
Press REC/OTR. The VCR/DVD will be the Recording
Pause mode.
4
Press CH (o o /p p ) to select the channel to be recorded .
5
Press REC/OTR or STILL/PAUSE. The recording will
begin.
6
Press STOP when recording is completed.

Hi-Fi Stereo Sound System

This VCR/DVD will record and playback Hi-Fi stereo sound. In
addition it has an A2 and NICAM stereo sound decoder.
This equipment will receive stereo and bilingual broadcasts
and there are several ways of recording and playing back the
sound.
Selecting the Sound Mode
You can select each mode by pressing AUDIO. Each mode is
indicated on the TV screen as following.
• During playback of the recorded tape in
Hi-Fi mode:
Mode
AUDIO OUTPUT
L
Hi Fi L Audio
Stereo
R
Hi Fi R Audio
L
Hi Fi L Audio
L
R
Hi Fi L Audio
L
Hi Fi R Audio
R
R
Hi Fi R Audio
L
Normal Audio
Normal
R
Normal Audio
marks
mark represents 1 minute.
1
4
to
under "Viewing and
Display on
the TV screen
STEREO
LEFT
RIGHT
- None -
• Reception of stereo broadcasts:
Mode
Stereo
L
R
Monaural
• During reception of bilingual broadcasts:
Mode
MAIN
SUB
MAIN
SUB
NOTES:
• If you play non-Hi-Fi tapes, the VCR/DVD will play auto-
matically in monaural even if you select any mode.
• If the stereo signal becomes weak, the broadcast is
automatically recorded in monaural.

OTR (One Touch Recording)

This function enables you to set the duration of a recording
simply by pressing REC/OTR.
1
1
Follow steps
to
same Programme".
2
Press REC/OTR repeatedly until the desired recording
length appears in the upper left corner of the TV screen.
Recording stops when 0:00 is reached.
• To check remaining time during an OTR, press DIS-
PLAY.
• To change the recording length during an OTR, press
REC/OTR until the desired length appears.
• To stop an OTR before recording is finished, press
STOP.
• To cancel the OTR but continue recording, press
REC/OTR repeatedly until "I" appears without the
recording length.
NOTE:
• If there is no timer recording set after an OTR, the
VCR/DVD switches to DVD mode and
because the VCR is still on standby for timer record-
ings. Press TIMER ON/OFF on the remote control or
STOP/EJECT on the VCR/DVD to cancel timer standby,
then press VCR button to use the VCR again. If there is
a timer recording set after an OTR, the VCR/DVD
switches to the DVD mode and
that the VCR/DVD is on timer standby. Press TIMER
ON/OFF on the remote control or STOP/EJECT on the
VCR/DVD to cancel timer standby, then press VCR but-
ton to use the VCR again.
– 15 –
Display on
AUDIO OUTPUT
the TV screen
L
L Audio
STEREO
R
R Audio
L
L Audio
LEFT
R
L Audio
L
R Audio
RIGHT
R
R Audio
L
L+R Audio
- None -
R
L+R Audio
Display on
AUDIO OUTPUT
the TV screen
L
Main Audio
MAIN
R
Main Audio
L
Sub Audio
SUB
R
Sub Audio
L
Main Audio
MAIN
SUB
R
Sub Audio
3
in "Viewing and Recording the
lights up, indicating
flashes
EN

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dv-nc100ru

Table of Contents