Speaker / Amplifier Connection; Inserting A Ca Card; Access Ci Module Service - Sharp LC-19DV200E Operation Manual

Connecting external devices

Speaker / Amplifier connection

E
Connecting an amplifier with digital audio
input
Speaker / Amplifier
connection

Inserting a CA Card

In order to receive coded digital stations, a Common
Interface Module (CI Module) and a CA Card must be
inserted in the CI slot of your TV set.
The CI Module and the CA Card are not supplied
accessories. They are usually available from your
dealer.
Inserting the CA Card into the CI Module
1.
With the side with the gold coloured contact
chip facing the side of the CI Module marked
with the provider's logo, push the CA Card
into the CI Module as far as it will go. Note the
direction of the arrow printed on the CA card.
34
54B0101A_English.indd 34 54B0101A_English.indd 34
Digital audio in
(COAXIAL)
Digital audio cable
DIGITAL AUDIO
COAXIAL OUT
2.
Inserting the CI Module in the CI slot.
3.
Carefully insert the CI Module in the CI slot with
the contact side forward. The logo on the CI
Module must be facing forward from the rear of
the TV. Do not use excessive force. Make sure
the module is not bent in the process.

Access CI Module service

After inserting and activating the CI Module, make sure
the input source is TV.
1.
Press TV MENU on the remote control.
2.
Go to > Common Interface.
On-screen applications and content are provided by
your digital TV service operator.
2/27/2010 17:23:38 2/27/2010 17:23:38