Zooming (Dvd/Vcd); Locating Desired Scene (Dvd/Vcd/Audio Cd); Changing Soundtrack Language (Dvd/Vcd); Subtitles (Dvd) - Sharp LC-19DV200E Operation Manual

DVD Operation
E
Playing frame by frame (DVD/VCD)
Press PAUSE during playback.
Each time you press REV
advances one frame.
To resume normal playback, press PLAY
NOTE
• The sound is muted during frame by frame playback
• Reverse frame by frame does not work on VCD.
E
Playing in slow-motion (DVD/VCD)
Press SLOW or SLOW
Each time you press SLOW
motion speed changes.
To resume normal playback, press
NOTE
• The sound is muted during slow-motion playback.
• Reverse slow ( ) does not work on VCD.
E
Locating a chapter or track (DVD/VCD/Audio CD)
Press SKIP or SKIP
chapter or track number you want.
Press SKIP to playback starts from the selected
chapter or track.
Press SKIP to locate succeeding chapters or
tracks.
Playback starts from the beginning of the current
chapter or track.
NOTE
• A prohibition message "Depending on the disc, this
operation may be prohibited" or "This operation can't
be performed" may appear at the screen. This message
means either the feature you tried is not available on the
disc, or the unit cannot access the feature at this time.
This does not indicate a problem with the unit.

Zooming (DVD/VCD)

This unit will allow you to zoom in on the frame image.
You can then make selections by switching the position
of the frame.
1.
Press ZOOM during playback. The centre part
of the image will be zoomed in. Each press of
ZOOM will change the Zoom 2x and 4x.
2.
Press / / / to view a different part of
the frame. You may move the frame from the
centre position to UP, DOWN, LEFT or RIGHT
direction.
3.
In the zoom mode, press
return to a 1:1 view.
NOTE
• You can select the Pause or Slow in the zoom mode.
• Some discs may not respond to zoom feature.
24
54B0101A_English.indd 24 54B0101A_English.indd 24
or FWD , the picture Use the title, chapter or track recorded on the disc to
locate the desired point to playback.
To check the title and chapter/track, press
.
1.
2.
during playback.
or SLOW , the slow-
PLAY .
NOTE
•
•
repeatedly to display the
You can select the language when you play a
multilingual disc.
1.
2.
E
Audio type changes as follows each time you press
AUDIO.
When playing back a disc recorded with subtitles, you
ZOOM repeatedly to
can select the subtitle language or turn the subtitle off.
1.
2.

Locating desired scene (DVD/VCD/Audio CD)

Press Number buttons (0–9) to input the
number during playback or stop mode.
• If you input a wrong number, press
• Refer to the package supplied with the disc to
check the numbers.
Press OK. Playback starts.
• When you change the title, playback starts
from Chapter 1 of the selected title.
• Some discs may not work in the above
operation.
In case of the VCD playback with PBC, this feature does
not work. Turn off the PBC (see page 21).
This Function cannot be used for DivX disc.

Changing Soundtrack Language (DVD/VCD)

Press AUDIO during playback. The current
soundtrack language will appear.
Current/Total
Audio 1/2 English Dolby Digital 2/0CH
Press AUDIO repeatedly until the desired
language is selected.
• The on screen display will disappear after a few
seconds.
In case of Video CD playback
Audio Right
Audio Left

Subtitles (DVD)

Press repeatedly during playback until the
desired language is selected.
Current/Total
Subtitle 1/2 English
To turn off the subtitle, press
appears.
• The on screen display will disappear after a few
seconds.
.
CANCEL.
Audio Stereo
until "Off"
2/27/2010 17:23:31 2/27/2010 17:23:31