Teletext; Select A Teletext Language; Using The Mheg5 Application (Uk Only) - Sharp LC-19DV200E Operation Manual

Watching TV

Teletext

What is Teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped television sets.
Your TV receives Teletext signals broadcast by a TV
network, and decodes them into graphical format for
viewing. News, weather and sports information, stock
exchange prices and programme previews are among
the many services available.
Turning on and off Teletext
1.
Select a TV channel or external source
providing a Teletext programme.
2.
Press to display Teletext.
• Many stations use the TOP operating system,
while some use FLOF (e.g. CNN). Your TV
supports both these systems. The pages are
divided into topic groups and topics. After
switching on the teletext, up to 1000 pages are
stored for fast access.
• If you select a programme with no Teletext
signal, "No Teletext " displays.
• The same message displays during other
modes if no Teletext signal is available.
3.
Press again to display the Teletext and
normal image at the same time on the screen.
NOTE
• Teletext will not work if the selected signal type is RGB.
Buttons for teletext operations
Buttons Description
Increase or decrease the page
P (rs)
number.
Colour Select a group or block of pages
(R/G/Y/B) displayed in the coloured brackets
at the bottom of the screen by
pressing the corresponding
Colour (R/G/Y/B) on the remote
control unit.
0 - 9 Directly select any page from 100
to 899 by using 0 - 9.
Press this button to activate
(TEXT)
Teletext with TV.
Switch the Teletext image to Top,
(SIZE)
Bottom or Full.
Stop updating Teletext pages
(HOLD)
automatically or release the hold
mode.
Reveal or hide hidden information
(REVEAL)
such as an answer to a quiz.
12
54B0101A_English.indd 12 54B0101A_English.indd 12
Buttons Description
Select the subpage when the
(SUBPAGE)
current page contains subpage(s).
Press number buttons on the
remote control to access the
subpage directly. (four digits)

Select a Teletext language

1.
Press TV MENU on the remote control and
≥ Teletext.
select
2.
Press OK or to enter Teletext menu and
/
press to select one of the following.
• Digital Teletext Language.
• Analog Teletext Language.
3.
Highlight your selection and press
make a selection.
4.
Follow the on-screen instructions to exit.

Using the MHEG5 application (UK only)

Some services bring you programmes with the MHEG
(Multimedia and Hypermedia Expert Group) application
encoded, letting you experience DTV interactively.
When provided, the MHEG5 application will start when
you press (TELETEXT) or the Red button.
Sample MHEG5 screen
/
to
2/27/2010 17:23:24 2/27/2010 17:23:24